The membrane keypad beside the door of a countertop microwave, the display showing plain digits and one key worn smooth at its center.

SKS F3: a key on the speed oven reads as held down

SKS lists F3 as a key short.

(844) 393-5858

Mon–Sat, 8am–8pm

  • Control board and touchpad
  • Microwave control board and touchpad repair
  • Source: SKS

Book a visit

Three short steps, about a minute.

or call (844) 393-5858

What F3
actually means.

SKS lists F3 as a key short. The control expects each touch key to open again after you let go; when one stays closed, it reports F3 and refuses to run so a phantom press cannot start or change a cycle.

SKS microwave display

What to do when F3 shows on the microwave

Before you book,
in this order.

Each step comes from SKS's own guidance for F3 on its microwaves. Follow it to the end: the last card says whether this is a visit.

01

Press CLEAR/OFF to clear the code.

02

Wipe the touch screen and panel with a soft, barely damp cloth and dry it, since moisture or grease can bridge a key.

03

If F3 comes back with a dry, clean panel, book a visit so the touch panel and its connection to the control can be tested.

Still there?

It usually turns into microwave control board and touchpad repair. Book with the code and the model number.

What not to do

F3 is not the control lock; a locked SKS speed oven shows a lock icon and simply ignores the keys. It also does not mean the unit has lost power, since the display is still working when F3 appears.

What you may
notice with it.

The microwave problems F3 tends to arrive with. Answer these at the microwave before anyone is booked.

All problems

Where F3 usually leads

Microwave control board and touchpad repair.

Control board, keypad membrane or display · moderate to highest.

In SKS's own words

Cause: Key Short
SKS SKSLV3001S 30-inch built-in microwave speed oven owner's manual SKS SKSLV3011MT transitional speed oven owner's manual

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Printed in the SKSLV3001S and SKSLV3011MT built-in microwave speed oven code tables.

SKS F3 microwave repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A family warming plates of food at a built-in microwave in a bright kitchen
For the heart of your home.

Questions
about F3.

Can I clear F3 myself?
Press CLEAR/OFF to clear the code. If it comes back, it needs a visit.
Can cleaning spray on the touch screen cause F3 on my SKS speed oven?
Liquid left on the panel can make a key read as pressed. Spray the cloth rather than the panel, dry it, and clear the code before deciding anything is broken.
My SKS speed oven shows F3 and beeps even when nobody touches it. Why?
That is what a shorted key looks like to the control: a press that never ends. If a dry panel does not stop it, the touch assembly needs a technician.
Is the lock icon on my SKS speed oven related to F3?
No. The lock icon means Control Lock is on and is cleared by holding CLEAR/OFF for three seconds, while F3 is a hardware reading from the keys.

Back to your everyday

Still showing F3?

Three details make the booking useful: the characters or beeps just as they appeared, every character of the model number, and whether a cup of water still warms up. With those, the technician arrives already halfway to the answer.

(844) 393-5858 Schedule a repair