

Sharp ENJOY YOUR MICROWAVE message: the power was interrupted
When power to a Sharp Microwave Drawer is interrupted, the display comes back flashing and repeats ENJOY YOUR MICROWAVE, TOUCH CLEAR AND TOUCH CLOCK.
Mon–Sat, 8am–8pm
- Power and supply
- Microwave diagnostic visit
- Source: Sharp
Book a visit
Three short steps, about a minute.
or call (844) 393-5858
Loading appointment form…
The appointment form couldn’t load. Please try again.
What ENJOY YOUR MICROWAVE
actually means.
When power to a Sharp Microwave Drawer is interrupted, the display comes back flashing and repeats ENJOY YOUR MICROWAVE, TOUCH CLEAR AND TOUCH CLOCK. Any program running at the time was erased along with the time of day.
Sharp microwave display · also shown as ENJOY YOUR MICROWAVE TOUCH CLEAR AND TOUCH CLOCK, Display flashes
What to do when ENJOY YOUR MICROWAVE shows on the microwaveKind of codePower and supply
The microwave has noticed trouble with the power reaching it: an outage or a brownout that interrupted a cycle, a voltage too low for the magnetron to start, or a supply that dipped when something else on the circuit switched on. As often as not the cause is the circuit, the outlet in the cabinet above or the breaker rather than the unit; a main fuse that blows again after a reset points inside, where only a technician goes.
Usually leads toMicrowave diagnostic visit
A visit that times a cup of water against the clock, checks the door and its switches, then tests the high-voltage section, the controls and the moving parts one at a time until a single part is named.
Shows up asWhat a Microwave Error Code Is Telling You
A microwave error code may be a letter and a number on the display, a lock or demo word, a row of dashes, or a beep with a blinking clock, and it can show while the microwave still heats or block every key until it is cleared.
MakeSharp
Sharp microwaves repaired in the kitchen, including drawer models under the counter, countertop units and those mounted over the burners.
SourceSharp SMD2470AS / SMD2470AH / SMD3070AS Microwave Drawer operation manual
Printed in the SMD2470 / SMD3070 and SMD2489 drawer manuals; Sharp's hood-combination manuals show a similar power-up greeting.
Before you book,
in this order.
Each step comes from Sharp's own guidance for ENJOY YOUR MICROWAVE on its microwaves. Follow it to the end: the last card says whether this is a visit.
Touch STOP/CLEAR.
Set the clock and restart any cooking that was interrupted.
If the message returns without a household outage, check the breaker and the outlet, then book a visit.
Still there?
It usually turns into microwave diagnostic visit. Book with the code and the model number.
What not to do
The flashing display is not a control failure. Sharp's troubleshooting lists it under power failure, and the fix is to clear it and reset the clock.
What you may
notice with it.
The microwave problems ENJOY YOUR MICROWAVE tends to arrive with. Answer these at the microwave before anyone is booked.
All problemsWhere ENJOY YOUR MICROWAVE usually leads
Microwave diagnostic visit.
Sharp
microwaves.
Sharp microwaves repaired in the kitchen, including drawer models under the counter, countertop units and those mounted over the burners.
Sharp microwave repairMore Sharp codes
Power and supply on other makes
Microwave hood combination
The microwave that hangs from the wall cabinets above the burners, heating food in its cavity while its own fan, light and filters handle the steam and grease rising from the pans beneath it.
Built-in microwave
A microwave set into a tall cabinet or a wall of cabinetry at eye level, either a countertop body wrapped in a trim kit or a true built-in model, including speed and convection microwaves that brown as well as heat.
Microwave drawer
A microwave built under a counter or into a kitchen island that opens like a drawer at the touch of a key, with a motor and gears sliding its cavity out toward you.
In Sharp's own words
should be interrupted, the display will intermittently show
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Printed in the SMD2470 / SMD3070 and SMD2489 drawer manuals; Sharp's hood-combination manuals show a similar power-up greeting.
Sharp ENJOY YOUR MICROWAVE microwave repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about ENJOY YOUR MICROWAVE.
Can I clear ENJOY YOUR MICROWAVE myself?
Why is my Sharp drawer display flashing?
Do I lose my cooking program after the Sharp drawer shows this message?
The Sharp message comes back every day. What does that mean?
Back to your everyday
Still showing ENJOY YOUR MICROWAVE?
Three details make the booking useful: the characters or beeps just as they appeared, every character of the model number, and whether a cup of water still warms up. With those, the technician arrives already halfway to the answer.