KitchenAid F2H1: the vent fan and light switch on the microwave
Some KitchenAid hood combinations put the vent fan and cooking-surface light controls on a separate switch at the lower left of the front panel.
Mon–Sat, 8am–8pm
- Fans and ventilation
- Microwave vent fan and filter repair
- Source: KitchenAid
Book a visit
Three short steps, about a minute.
or call (844) 393-5858
Loading appointment form…
The appointment form couldn’t load. Please try again.
What F2H1
actually means.
Some KitchenAid hood combinations put the vent fan and cooking-surface light controls on a separate switch at the lower left of the front panel. F2H1 means the control has lost sense of that switch or its wires, so the fan or light may run on its own or not respond.
KitchenAid microwave display · also shown as F2 H1
What to do when F2H1 shows on the microwaveKind of codeFans and ventilation
A fan the microwave depends on has slowed or stopped: the cooling fan that keeps the magnetron and the board from overheating, or on a hood combination the exhaust fan that draws steam up through the grease filters. A filter packed with grease or a damper stuck shut can bring on the same warning, so a clean filter comes first; a motor that hums without turning, or a warning that returns with clean filters, is a repair.
Usually leads toMicrowave vent fan and filter repair
Bringing back the exhaust fan of a microwave hood combination, from grease filters closed with residue and a spent charcoal filter to a blower motor, a speed relay or the heat switch that starts it.
Shows up asWhat a Microwave Error Code Is Telling You
A microwave error code may be a letter and a number on the display, a lock or demo word, a row of dashes, or a beep with a blinking clock, and it can show while the microwave still heats or block every key until it is cleared.
MakeKitchenAid
KitchenAid microwave problems sorted out on site, from a turntable that stands still to a panel that ignores every press.
SourceKitchenAid Product Help, over-the-range microwave: F2H1
Listed on KitchenAid's help pages for over-the-range microwaves; the lettered F-codes belong to the newer hood controls, and the exact code set depends on the model generation.
Before you book,
in this order.
Each step comes from KitchenAid's own guidance for F2H1 on its microwaves. Follow it to the end: the last card says whether this is a visit.
Switch the microwave off at the breaker for one full minute, then switch it back on.
Leave it idle for a minute and watch the display; if the code does not return, run a short test cycle.
Check that grease has not built up around the fan and light switch at the lower left corner of the front.
If F2H1 comes back or the fan will not stop, book a visit.
Still there?
It usually turns into microwave vent fan and filter repair. Book with the code and the model number.
What not to do
F2H1 does not mean the fan motor itself has burned out, though the symptom can look the same. It also does not affect heating directly; a microwave showing it may still heat food.
What you may
notice with it.
The microwave problems F2H1 tends to arrive with. Answer these at the microwave before anyone is booked.
All problems
Where F2H1 usually leads
Microwave vent fan and filter repair.
KitchenAid
microwaves.
KitchenAid microwave problems sorted out on site, from a turntable that stands still to a panel that ignores every press.
KitchenAid microwave repairMore KitchenAid codes
All 22 KitchenAid codesFans and ventilation on other makes
All 3 codes of this kind
Microwave hood combination
The microwave that hangs from the wall cabinets above the burners, heating food in its cavity while its own fan, light and filters handle the steam and grease rising from the pans beneath it.
Built-in microwave
A microwave set into a tall cabinet or a wall of cabinetry at eye level, either a countertop body wrapped in a trim kit or a true built-in model, including speed and convection microwaves that brown as well as heat.
Countertop microwave
A microwave that stands on the counter or a shelf and plugs into an outlet beside it, from a compact model for a dorm to a large inverter or convection unit in a busy family kitchen.
In KitchenAid's own words
There may be a problem with the Vent Fan and Light Switch (located on the lower left front side panel) or the associated wiring.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Listed on KitchenAid's help pages for over-the-range microwaves; the lettered F-codes belong to the newer hood controls, and the exact code set depends on the model generation.
KitchenAid F2H1 microwave repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about F2H1.
Can I clear F2H1 myself?
My KitchenAid vent fan will not turn off and shows F2H1. What should I do?
Is F2H1 on a KitchenAid about the fan motor?
Can grease cause F2H1?
Back to your everyday
Still showing F2H1?
Three details make the booking useful: the characters or beeps just as they appeared, every character of the model number, and whether a cup of water still warms up. With those, the technician arrives already halfway to the answer.