A microwave hood combination under wall cabinets with a dark display just after a power cut, a kitchen clock on the wall behind showing the evening.

Bertazzoni WELCOME PRESS CLEAR AND PRESS CLOCK: set the clock after power returns

Every Bertazzoni microwave greets you after power returns, each in its own words: the MO30STANE scrolls WELCOME PRESS CLEAR AND PRESS CLOCK, the KOTR24XV hood model shows 12:00 PRESS CLOCK ENTER TIME, and the MD24LX drawer flashes WELCOME before going to 00:00.

(844) 393-5858

Mon–Sat, 8am–8pm

  • Power and supply
  • Microwave diagnostic visit
  • Source: Bertazzoni

Book a visit

Three short steps, about a minute.

or call (844) 393-5858

What WELCOME PRESS CLEAR AND PRESS CLOCK
actually means.

Every Bertazzoni microwave greets you after power returns, each in its own words: the MO30STANE scrolls WELCOME PRESS CLEAR AND PRESS CLOCK, the KOTR24XV hood model shows 12:00 PRESS CLOCK ENTER TIME, and the MD24LX drawer flashes WELCOME before going to 00:00.

Bertazzoni microwave display · also shown as 12:00 PRESS CLOCK ENTER TIME, WELCOME

What to do when WELCOME PRESS CLEAR AND PRESS CLOCK shows on the microwave

Before you book,
in this order.

Each step comes from Bertazzoni's own guidance for WELCOME PRESS CLEAR AND PRESS CLOCK on its microwaves. Follow it to the end: the last card says whether this is a visit.

01

Touch STOP/CLEAR (Stop/Reset on the hood models) and set the clock.

02

Restart any program that was interrupted; the microwave does not resume it.

03

If the greeting returns during the day without a power cut, check the breaker and any GFCI outlet on the circuit.

04

If the microwave trips the breaker when it starts, leave it off and book a visit.

Still there?

It usually turns into microwave diagnostic visit. Book with the code and the model number.

What not to do

The greeting is not an error; it only confirms that power came back. Repeated greetings with no outage, or a breaker that trips at start-up, are the part that needs attention.

What you may
notice with it.

The microwave problems WELCOME PRESS CLEAR AND PRESS CLOCK tends to arrive with. Answer these at the microwave before anyone is booked.

All problems

Where WELCOME PRESS CLEAR AND PRESS CLOCK usually leads

Microwave diagnostic visit.

In Bertazzoni's own words

The oven display will show WELCOME PRESS CLEAR AND PRESS CLOCK.
Bertazzoni MO30STANE/24 microwave oven manual Bertazzoni KOTR24XV 24-inch microwave hood combination manual Bertazzoni MD24LX microwave drawer manual

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. MO30STANE / MO30STANE24: WELCOME PRESS CLEAR AND PRESS CLOCK. KOTR24XV: 12:00 PRESS CLOCK ENTER TIME. MD24LX drawer: WELCOME, then 00:00.

Bertazzoni WELCOME PRESS CLEAR AND PRESS CLOCK microwave repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A family warming plates of food at a built-in microwave in a bright kitchen
For the heart of your home.

Questions
about WELCOME PRESS CLEAR AND PRESS CLOCK.

Can I clear WELCOME PRESS CLEAR AND PRESS CLOCK myself?
Touch STOP/CLEAR (Stop/Reset on the hood models) and set the clock. If it comes back, it needs a visit.
Why does my Bertazzoni microwave keep showing WELCOME?
It shows each time power is restored. If you see it often without an outage, the supply to the microwave is dropping out and the circuit should be checked.
Do I have to set the clock on a Bertazzoni microwave drawer?
No, the MD24LX shows 00:00 when the clock is not set and still works. Setting it just makes the display useful.
Does WELCOME mean my program was saved?
No. A power cut clears whatever was running, so start the cooking again once the clock is set.

Back to your everyday

Still showing WELCOME PRESS CLEAR AND PRESS CLOCK?

Three details make the booking useful: the characters or beeps just as they appeared, every character of the model number, and whether a cup of water still warms up. With those, the technician arrives already halfway to the answer.

(844) 393-5858 Schedule a repair